Evacuated tube for solar thermal system

Unit Price: USD 2.1500 / Piece/Pieces
Payment Type: L/C,T/T
Incoterm: FOB,CFR,CIF
Min. Order: 6000 Piece/Pieces
Delivery Time: 10 Days

Basic Info

Model No.: 58*1800 vacuum tube, 58*1500 vacuum tube, 58*2100 vacuum tube

Application: Water Heater, Solar Thermal

Pipe Material: Glass

Additional Info

Packaging: standard package of 10 pcs/carton, customized package is avaliable on request

Productivity: 5 million pieces annually

Brand: Linuo Ritter International

Transportation: Ocean

Place of Origin: China

Supply Ability: 10000 pcs per day

Certificate: ISO9001,ISO14001,OHSAS18001

Port: Qingdao

Product Description

The tubes are made from low emissivity borosilicate glass (glass with a very low iron content that has superior durability and heat resistance ) with an all-glass seal and they employ AL/N on AL selective coating, which enables the use of the whole solar energy spectrum to generate heat.

This produces greater thermal efficiency in bright sunshine but also produces high efficiency in overcast or diffuse sunlight conditions. Further, the tubes are evacuated and have a barium getter (vacuum indicator) which changes color from silver to white if a tube`s vacuum has been compromised.

An examination of the tubes shows that the outside is actually 2 layers of glass and a vacuum has been created between them.


A good way to demonstrate this would be to fill an empty tube with very hot water and notice that it does not even get warm as you hold the tube in your hands. That is because of the [thermos effect" created by having a vacuum between the layers of glass.


Started the production of vacuum tube/evacuated tube since 1998. 

Annual production capacity of 5 million pieces. 

Daily prodution capacity of 20000 pieces tubes.

Has been supplying the vacuum tube towards the worldwide well-known manufacturer of solar water heater and solar thermal products. 

Higher absorption rate of 92%-94%, lower emission rate.

47-1500mm, 58-1800mm, 58-2100mm tubes are avaliable.

Key component of solar collector and solar water heater

Coating material: Al-N/Al or SS-Al/N/Cu.



Specification


Absorbance rate after coating (AM1.5)

 α%

≥89

Emission rate after coating (80±5 °C)

 α%

≤ 7

Stagnation parameter

m² °C/kW

≥ 251

Solar radiance exposure

 MJ/m²

≤ 3.8

Average heat loss coefficient

W/(m²°C)

≤ 0.56

Selective coating material

 AL-N/AL, SS-AL-N/Cu

Impact resistance

Steel Ball Test: Steel ball with diameter of 30 mm fall on the evacuated tube vertically from 450 mm height.

Vacuum degree

 Pa

≤ 3X10-3

Pressure

Mpa

0.6

Transparent (AM1.5)

≥ 0.86 (ISO9806-1: 1994)


Solar Energy Collector Vacuum Tube Three Target 58x1800

Contact Person: Guo

Phone:86-531-88729112

Fax:86-531-88729223

Address: No. 30766 East Jingshi Road,Jinan,Shandong

Sweep wechat

© 2019 CHINA WAY. All Rights Reserved.  Linuo Ritter International Co.,Ltd,  Inc.     All rights reserved.  site map.  sitemap.html